Registered Technical Person

The qualifications of the technical personnel and their competence to carry out different jobs for building /Development permit and supervision for the purpose of licensing by the Planning Authority shall be as given below.

• 2.1 Qualification:The minimum qualification for a Town planner shall be the Associate Membership of the Institute of Town Planners or graduate or post-graduate degree in Town and Country Planning, from a recognized institution.
• 2.2 Competence:The Registered Town Planner is competent to carry out the work related to the development permit as given below: Preparation of plans for land sub-division / layout and related information connected with development permit for all areas. Issuing of certificate of supervision for development of land of all areas.

Note: However, for land layouts for development permit above 5 hectare in area, Landscape Architect shall also be associated, and for land development infrastructural services for roads, water supplies, sewerage / drainage, electrification etc. the Registered Engineers for utility services shall be associated.

• 3.1 Qualification:The minimum qualification for Architects shall be those who are holding bachelor degree or equivalent in Architecture and holds valid registration with the Council of Architecture under the Architects Act, 1972.
• 3.2 Competence:The Registered Architect is competent to carry out the work related to the building / development permit as given below: All plans and information connected with building permit except engineering services of multi-storeyed / special buildings. Issuing certificate of supervision and completion of all buildings pertaining to architectural aspects. Preparation of sub-division / layout plans and related information connected with development permit of area up to 1 hectare for cities and 2 hectare for other places. Issuing certificate of supervision for development of land of area up to 1 hectare for cities and 2 hectare for other places.

• 4.1 Qualifications:The minimum qualifications for an engineer shall be graduate in civil engineering / architectural engineering of recognized Indian or Foreign University, or the Member of Civil Engineering Division / Architectural Engineering Division of the Institution of Engineers (India) or the statutory body governing such profession, as and when established.
• 4.2 Competence:The Registered Engineer is competent to carry out the work related to Building / Development Permit as given below: All plans and information connected with building permit; Structural details and calculations of buildings on plot up to 500 sq.m. and up to 5 storeys or 16.0 m. In height; Issuing certificate of supervision and completion for all buildings; Preparation of all service plans and related information connected with development permit; and Issuing certificate of supervision for development of land for all area.

On the basis of their academic qualifications and experience, Structural Engineers shall be “Registered” in three “Grades”. The eligibility criteria for registration in each “Grade” and the “Scope of Work” which can be entrusted to the Structural Engineer of each “Grade” are given below. The registration shall be renewed every three years. The registration may be cancelled permanently or for a specified period for unprofessional conduct

Qualifications:B.E.Civil or equivalent with minimum 10 years experience (after attaining the degree) in structural design work at a responsible position as a Structural Designer or M.E.Structures/Earthquake Engineering or Ph.D. in Structural Engineering with minimum 5 years of experience (after attaining the degree) in structural design work at a responsible position a Structural Designer. The experience as stated above shall be under a Registered Structural Engineer. (This requirement shall be waived for the first ten years of the promulgation of these Regulations).

Competence:To prepare Structural design and Structural drawings of High rise buildings, Educational, Institutes, Hospitals, Public buildings, Special Structures, Lifeline Buildings and the likes.

Qualifications:B.E.Civil or equivalent with minimum 5 years experience (after attaining the degree) in structural design work at a responsible position as a Structural Designer or M.E.Structures/Earthquake Engineering or Ph.D. in Structural Engineering with minimum 3 years of experience (after attaining the degree) in structural design work at a responsible position a Structural Designer. The experience as stated above shall be under a Registered Structural Engineer. (This requirement shall be waived for the first five years of the promulgation of these Regulations).

Competence:To prepare Structural design and Structural drawings of various buildings having more than ground floor + 2 upper floors (Plinth area upto 5000 sq.m).

Qualifications:B.E.Civil or equivalent with minimum 3 years experience (after attaining the degree) in structural design work at a responsible position as a Structural Engineer or M.E.Structures/Earthquake Engineering or Ph.D. in Structural Engineering with minimum 1 year of experience (after attaining the degree) in structural design work at a responsible position as a structural engineer. The experience as stated above shall be under a Registered Structural Engineer. (This requirement shall be waived for the first three years of the promulgation of these Regulations)

Competence:To prepare Structural design and Structural drawings of Low rise buildings excluding above mentioned structures for Grade-I and Grade-II